COMBINE TWO LIGHTS TO ONE SWITCH HOW TO
COMBINE TWO LIGHTS TO ONE SWITCH INSTALL

A conventional 15A circuit can have up to 1400W of lighting loads connected to it. The load of the fixtures is what determines how many lights a circuit can accommodate. There is no limit to the number of lights on a circuit. How many light switches can be connected together? Strip both ends of each cable with a knife, separate the wires and remove 1/2 inch of insulation from the end of each. Pull one end of each cable through the back of one of the light fixture electrical boxes. Run 12-gauge electrical cable between each switch and the light it controls. How do you connect two lights to two switches from one power source? Quote from Youtube video: We therefore take the live wire and divert this into the common terminal or switch one we run another wire from the common terminal or switch to and connect this to the lamp. How do you wire a ceiling with two switches? The power source is typically the building’s main electrical panel. It’s common to power two or more light switches from a single power supply, and the switches can be in the same electrical box or different parts of the house. Connect the red Traveler wire to one of the “L2” holes on the Base.You can wire two light switches with one power supply.Connect the black Traveler wire to one of the “L1” holes on the Base.Connect the Common wire to one of the “C” holes on the Base.Connect the Ground wire to one of the “⏚” holes on the Base.

COMBINE TWO LIGHTS TO ONE SWITCH HOW TO

If there are multiple neutral wires, see our section on wire nuts and wire extensions for how to connect them together.

Connect the Neutral wire to one of the “N” holes on the Base.

Insert the wires from the wall into the terminal holes in the Brilliant Base, and attach them in by tightening the screws on the sides of the Base until the wires are secure. Once you have identified each wire, disconnect the wires from your existing switch and set your old switch aside. The other black wire is called the Common wire. These two wires are the Black Traveler wire and Red Traveler wire that connect to your other switch. Identify the black wire that comes into the electrical box in the same shrouded cable as the red wire. For two switches, you will see two black wires and one red wire.

Common and Traveler - Generally black and red.

COMBINE TWO LIGHTS TO ONE SWITCH INSTALL

If this is the case, do not install Brilliant, and consult an electrician to bring your home wiring up to code. If you are in an old house, you may find switches without ground wires. Ground wires are used in nearly all circumstances.

Ground (⏚) - Generally bare copper or green in color.

In this event, you should consult an electrician. If there is no neutral wire, then your home is not compatible with Brilliant. If there is more than one neutral wire, you should connect them together, and then to Brilliant, using our section on connecting wire nuts and wire extensions for instructions. The neutral wire may be part of a bundle, and is likely capped with a wire nut. If there is no neutral wire connected to your switch, one or more will most likely be in the back of the box containing the switch.

Neutral wires are not used with a standard switch, although some electronic dimmers use them.

One or more neutral wire(s) may or may not be connected to your switch. Neutral (N) - Generally white in color, and found in homes with modern wiring standards.A “multi-way” switch is a “3-way” or “4-way” switch, meaning that the same lights can be controlled from multiple locations.įirst, identify the wires that you will use. “4-way” switches are added when there are three or more locations. When there are other switches controlling the lights on a circuit, this is called a '3-way,' '4-way,' or 'multi-way' configuration. A “3-way” switch makes it possible to turn the power on and off from more than one location.

Combine two lights to one switch